Diy Wood Wall Shelves

Good Idea To Use Rustic Wood Wall Shelves

Butcher Block Kitchen Island Shelves

Install Pretty Reclaimed Wood Kitchen Shelves

August 26, 2019 Wood Shelves

Quality Raw Wood Shelves

On a raw wood shelves, quality comes from three sources: the use of good wood, mounting the platform securely to the wall and the construction carefully to ensure the edges and clean lines. Fortunately, all three of these characteristics are well within reach of woodworkers, even beginners. The trick is to work slowly, and double check each step to make sure you have done it perfectly. These plans make a long 3-foot shelving that can be securely mounted to three wall studs. Use a wood stain and of your choice, based on the theme and color of your existing decor.

Best Raw Wood Shelves

Prepare shelf, drill seven holes in the center at the edge of 36 inches from the table of 8 by 36 inches.  Make four lines of holes through the face of the table using the same bit you used. Each line should run parallel to the short part of the table and consist of three holes. And then placed 1 inch, 4 inches and 7 inches from the long edge.

12 Inspiration Gallery from Quality Raw Wood Shelves

Image of: Unfinished Wood Floating Shelves Design
Image of: Wood Floating Shelves DIY
Image of: Unfinished Wood Floating Shelves Ideas
Image of: Simple Wood Floating Shelves
Image of: Reclaimed Wood Shelves Ideas
Image of: Raw Wood and Metal Shelf
Image of: Raw Pallet Wood Shelves
Image of: Raw Edge Wood Shelf Ideas
Image of: Floating Wall Shelves Decor Ideas
Image of: Elegant Raw Wood Shelf Best Ideas
Image of: Corner Floating Shelves Wood
Image of: Best Raw Wood Shelves

Widen the holes drilled using a drill bit of the same diameter as the heads of the 1 1/2 inch wood screws. Widen all holes on one side only, to a depth of approximately 1/4 inch. Sand all sides of the shelf plate. Apply a coat of wood stain to the shelf plate.

Comments are closed. -->